Dyln Water Technologies

2000 LPH RO Plant offered comes designed and developed using latest technology support and finds application in production of Application: mineral water, water for beverage plants and others. This RO water treatment plant comes with superior Ro membrane that provides support to disinfection and after-treatmen

Additional Information:

• Production Capacity: 2000LPH
• Delivery Time: 2 Week

A reverse osmosis system removes sediment and chlorine from water with a prefilter before it forces water through a semipermeable membrane to remove dissolved solids. After water exits the RO membrane, it passes through a postfilter to polish the drinking water before it enters a dedicated faucet.

Water Purifiers and RO (Reverse Osmosis) Systems are essential for producing safe, potable drinking water by removing impurities, salts, microbes, and contaminants.

Here's a complete overview:

✅ Types of Water Purification Systems 1. RO (Reverse Osmosis) Systems

• Removes dissolved salts (TDS), heavy metals, bacteria, viruses, and chemicals.

• Works by pushing water through a semi-permeable membrane.

2. UV (Ultraviolet) Purifiers

• Destroys bacteria and viruses using UV light.

• No TDS removal.

3. UF (Ultrafiltration) Purifiers

• Removes bacteria and cysts, not salts or dissolved chemicals.

• Works without electricity.

4. Activated Carbon Filters

• Removes chlorine, odor, pesticides, and organic compounds.

5. Sediment Filters

• Removes sand, dust, rust, and large particles before RO or UV.

As water passes through it, impurities are removed. Advantage of 500 lph fully automatic industrial ro plant. 2500 ppm. is the maximum TDS Level of Raw Water (input). It purifies water quality as required i.e pH 7-8 after correction. The system of recovery is properly maintained corresponding to the raw water TDS.

Electrodeionization (EDI) is a continuous, chemical-free process of removing ionized and ionizable species from feedwater using DC power. EDI is typically used to polish reverse osmosis (RO) permeate, and is a smart alternative to — and effective replacement of — conventional mixed bed ion exchange 

Additional Information:

• Production Capacity: 500 LPH
• Delivery Time: 15 day

Low-pressure switches, also known as light-pressure switches, are used to detect changes in hydraulic or pneumatic input pressure, particularly if the pressure falls below or increases over the predetermined pressure point, and to react by making electrical contact by switching on or off.